Back to top

Perform-X General DR Room

General purpose digital radiographic room
The Perform-X HF Digital Radiographic Systems are the most advanced radiographic systems manufactured and offered by Control-X. The various system configurations allow for a completely customized x-ray system built meeting or exceeding your specific imaging needs. Available with one or two digital flat panels, the Perform-X Digital Radiographic Systems are the correct choice when wanting the best in DR technologies.



The Perform-X Radiographic System from Control-X Medical represents the highest level of quality, durability and value in diagnostic X-ray imaging systems. The performance-price ratio is unique in the industry.

Highlights

Integrated Touch Screen Console Generator

The Milestone / APEX HF X-ray generators deliver the highest performance and reliability in any radiographic environment. Choose from flexible output power configurations up to 80 kW of power (32-50 kW for stored energy versions). Select interface options like {AEC|Automatic Exposure Control: ensures consistent image brightness under a wide range of exposure conditions} control, high speed starter, {Dose Area Product Meter|Measures the output dose at the beam limiting device and is used to estimate patient dose} interface and more. Standard for the system is the 50 kW MS / APEX 650 HF STR single tube high frequency generator, in three phase or stored energy version. The Apex image acquisition system touch screen integrates the generator functions as well - no separate generator control is needed. A preview is available within seconds on the touch screen monitor the processed image can be sent to any appropriate workstation in the hospital system, or elsewhere. 

Floor -only or floor-to-ceiling/wall mounted Tube Stand

The TS 99 family of tube stands with its flexible configuration options suits all general rad room reqirements. Choose and combine any of the options like rotational column (R), transverse arm movement (T), extended rails and digital SID display. Ideal for studies from lower extremities to chest/skull expossures due to its wide vertical motion range. 

Wall Bucky Stand

The WS 99 wall Bucky stand can accept a variety of different cassette size film/CR/DR or fixed full size flat panel DR receptors. Usually floor-to-wall, whith the free standing kit, the stand can be installed anywhere in the room. Choose the manual or motorized tilting option for exposures with oblique receptor positions. The WS 99 is equipped with dual-rope counterbalance system and an electromagnetic lock. 

4-way Float Top Elevating Patient Table 

When transferring patients onto the table, the 30 cm (or 50 cm depending on configuration) vertical travel and the 250 kg weight rating are invaluable features. Dedicated pedals drive the table top up and down and release the brakes of the floating table top. A comprehensive set of interlocks ensure safe operation.

Sensitive, Full Size CsI Flat Panel

A variety of flat DR panels are available in a single or a dual detector configuration. Our 43 cm x 43 cm or 35 cm x 43 cm (17” x 17” or 14” x 17”) {CsI|The cesium iodide scintillators convert the X-ray radiation to visible light for the TFT flat panel sensors. CsI is much more sensitive than Gadox, (Gd2O2S or gadolinium oxysulfide - the other popular material) resulting is lower patient dose.} flat panel detectors operate with very low patient dose and have optimal image quality. Processed images are available within seconds. These DR detectors are fully integrated into our Apex acquisition systems for precise exposure timing and accurate calibration. The optionally fixed, tethered or wireless panel cover all needs in all standard and special examination set-ups.

Cassette Size CsI Flat Panel Detector

The cassette size detector fits into existing cassette trays making it perfect for DR upgrades and shared flat panel applications.

DICOM Compliant DX Modality

The Apex Digital Acquisition Workstation is a full-featured DX modality for both medical and veterirary radiographic rooms. The Apex integrates with the Conrol-X generators and a number of flat panel models enabling a seamless workflow with high through-put. The preprogrammed and customizable image processing profiles with a host of processing and communication modules satisfy even the most demanding requirements from small clinics to large hospitals.

Specifications

1. System Features

Perform-X General DR Room
  • High frequency microprocessor controlled generator
  • APEX (PC controlled, TS Monitor) and AEC electronics
  • Heavy duty 4-way elevating table
  • Floor mounted stands stand with variable combination of movements
  • Single or dual panel DX DICOM modality 
  • High quality X-ray tube, manual collimator and HV cables

2. Generator

APEX HF Generator Series
  • 50 kW – 80 kW, 100 kHz, 400 to 1000 max mA, 40 to 150 kV range (depending on X-ray tube selected - please inquire for X-ray tube upgrades)
  • Power Requirements: 208- 400VAC three-phase (please specify input power when ordering)
  • Optional line matching transformers are available for an additional cost
  • Optional single-phase stored energy version up to 50 kW; 6.5 / 10 / 20 or 30 kWs stored energy (approx. 65/100/200/300 mAs exposures @ 100 kV)
  • Microprocessor control delivers reliable and accurate exposure parameter management
  • Can operate as a three-point (kV, mA and time), or a two-point (kV and mAs) or {AEC|Automatic Exposure Control: ensures consistent image brightness under a wide range of exposure conditions} technique selection generator
  • Optional interface for {AEC|Automatic Exposure Control: ensures consistent image brightness under a wide range of exposure conditions}, high speed starter, {DAP|Dose Area Product meter: measures the output dose at the beam limiting device and is used to estimate patient dose} 
  • Rapid automatic calibration mode reduces installation time
  • Automatic tube protection and safety interlocks are standard features
  • Compact Size: 60 cm x 40 cm x 50 cm (L x W x D), SE version (20/30 kWs): 90 cm x 40 cm x 50 cm

3. Tube Stand

TS 99 Tube Stand
  • Electrical locks for vertical and longitudinal positioning
  • 360° tube rotation with electric locks
  • Very quiet, “Easy-glide” effortless operation with special bearing systems
  • Fully counter-balanced, double rope system for safety
  • Extremely low focus-floor distance (approx. 25 cm)
  • TubePort Mount or Trunnion ring for x-ray tube
  • Floor-to ceiling, floor to wall or floor only mounting options
  • Certified manual collimator
  • Degree of freedom options: column rotation (“R” version) and cross-table travel (“T” version) or combination of both (“RT” version)
  • Optional digital SID and X-ray tube inclination display

4. X-ray Tube

Rad-14 X-ray Tube
  • 0.6 / 1.2 mm focus, 18/50 kW, 300 kHU, 12° target angle
  • 10 m standard (longer cable pairs available)
  • High/Standard Speed. 

Other types are available.

5. Wall Stand

WS 99 Wall Stand
  • 149 cm vertical travel area allows for the lowest and highest exposure positioning centered with tube stand
  • Fully counter-balanced, double rope system for safety
  • Electrical lock for easy positioning and permanent placement
  • Includes accessory rails that support a variety of accessories
  • Panel cover has permanent cross-lines and AEC field’s marks for easy patient and tube positioning
  • Wall box with terminal strips and cable covering hosing for a professional look
  • Heavy-duty grid cabinet or hi-speed Bucky with heavy-duty stainless steel tray and 103 LPI 10:1 grid (other grids available).
  • Optional AEC detector

6. Patient Table

Phoenix Elevating Radiographic Table
  • Heavy duty structure, rated at 225 kg patient load
  • Vertical travel 55 cm – 85 cm (table top heights)
  • Electric locks for longitudinal and transverse travel
  • 110 cm longitudinal, 24 cm transverse table top travel
  • 220 cm x 81 cm table top, < 0.8 mm Al equivalent filter (shorter lengths are available for small rooms)
  • Heavy-duty hi-speed Bucky with heavy-duty ss. tray and 103 LPI 10:1 grid (other grids are available), 55 cm travel
  • AEC optional

7. Image Receptor

Full Size 43 cm x43 cm Fixed Flat Panel
  • 43 cm x 43 cm image size - no rotation required
  • Pixel matrix 3008 (H) x 3072 (V)
  • Pixel pitch 143 µm
  • Optional: other DR panels including wireless types are available as well

8. Image Receptor

Cassette Size 35 cm x 43 cm Tethered Portable Flat Panel Detector
  • 35 cm x 43 cm image size
  • Pixel matrix 2560 x 3072
  • Pixel pitch 139 µm 
  • Fits into cassette trays

9. Image Acquisition System

APEX Digital Acquisition Workstation
  • PACS and DICOM 3.0 connectivity
  • Generator control integration included (for Milestone LC, Milestone 200 and CXP series generators)
  • Selectable flat panel interface
  • State-of-art image processing software, standard modules are diagnostic viewer software, work list query, DICOM print, emergency patient workflow, customizable processing profiles, local image storage
  • Many optional modules are available, please inquire
  • PC including dual core or better processor with 2 GB RAM, 500 GB or more hard disk storage
  • 21” flat panel monitor with touch screen operation included
  • Diagnostic monitor, larger archive capacity and additional workstations and options are available