Back to top

Perform-X General Rad Room

Radiography system for general imaging procedures
The Perform-X HF Radiographic Systems are the most advanced radiographic systems manufactured and offered by Control-X. The various system configurations allow for a completely customized x-ray system built meeting your exacting imaging needs. The choice of generator power options and upgrade features makes the Perform-X HF Radiographic Systems your logical choice for affordable, high quality, high performance and durable radiographic systems.


Highlights

Perform-X General Rad Room

 

Milestone HF LC Series

 

Floor -only or floor-to-ceiling/wall mounted Tube Stand

The TS 99 family of tube stands with its flexible configuration options suits all general rad room reqirements. Choose and combine any of the options like rotational column (R), transverse arm movement (T), extended rails and digital SID display. Ideal for studies from lower extremities to chest/skull expossures due to its wide vertical motion range. 

Wall Bucky Stand

The WS 99 wall Bucky stand can accept a variety of different cassette size film/CR/DR or fixed full size flat panel DR receptors. Usually floor-to-wall, whith the free standing kit, the stand can be installed anywhere in the room. Choose the manual or motorized tilting option for exposures with oblique receptor positions. The WS 99 is equipped with dual-rope counterbalance system and an electromagnetic lock. 

Stylix 2 Radiographic Table

 

Specifications

1. System Features

Perform-X General Rad Room
  • High frequency microprocessor controlled generator
  • APEX (PC controlled, TS Monitor) and AEC electronics optional
  • Heavy duty 4-way table
  • 360° tube rotation
  • Floor mounted stands stand with variable combination of movements
  • High quality X-ray tube, manual collimator and HV cables

2. Generator

Milestone HF LC Series
  • Milestone HF LC: 32 kW – 50 kW, 100 kHz, 10-up to 630 mA range, 125/150 kV. (depending on x-ray tube selected. please inquire for x-ray tube upgrades)
  • Power Requirements: 208-400VAC single or three-phase (Please specify input power when ordering). Line matching transformers are available at additional cost)
  • Single-phase stored energy version up to 50 kW; 6.5/ 10/ 20 kWs stored energy (Approx 65/100/200 mAs exposures @ 100 kV) available
  • Microprocessor control delivers reliable and accurate exposure parameter management
  • Console Type: Membrane switch with 100 anatomical programming (APR) settings
  • Can operate as a three-point technique selection generator (kV, mA and time), or in 2-point technique (kV, mAs)
  • Wide range of selectable exposure times for easy parameter selection and flexibility
  • Rapid automatic calibration mode reduces onsite procedure time
  • Automatic tube protection and interlocks are standard features
  • Compact Size: Width: 60 cm, Depth: 40 cm, Height: 50 cm

3. Tube Stand

TS 99 Tube Stand
  • Electrical locks for vertical and longitudinal positioning
  • 360° tube rotation with electric locks
  • Very quiet, “Easy-glide” effortless operation with special bearing systems
  • Fully counter-balanced, double rope system for safety
  • Extremely low focus-floor distance (approx. 25 cm)
  • TubePort Mount or Trunnion ring for x-ray tube
  • Floor-to ceiling, floor to wall or floor only mounting options
  • Certified manual collimator
  • Degree of freedom options: column rotation (“R” version) and cross-table travel (“T” version) or combination of both (“RT” version)
  • Optional digital SID and X-ray tube inclination display

4. X-ray Tube

E7239X X-ray Tube
  • 140 kHU
  • 1.0–2.0 mm focal spots, 90° horns
  • 20' (6m) high voltage cables (other lengths available)

Other types are available.

5. Wall Stand

WS 99 Wall Stand
  • 149 cm vertical travel area allows for the lowest and highest exposure positioning centered with tube stand
  • Fully counter-balanced, double rope system for safety
  • Electrical lock for easy positioning and permanent placement
  • Includes accessory rails that support a variety of accessories
  • Panel cover has permanent cross-lines and AEC field’s marks for easy patient and tube positioning
  • Wall box with terminal strips and cable covering hosing for a professional look
  • Heavy-duty grid cabinet or hi-speed Bucky with heavy-duty stainless steel tray and 103 LPI 10:1 grid (other grids available).
  • Optional AEC detector

6. Patient Table

Stylix 2 Radiographic Table
  • Heavy duty structure, rated at 220 kg patient load
  • Electric locks for longitudinal and transverse table top travel
  • 110 cm longitudinal, 24 cm transverse table top travel
  • 220 cm x 81 cm table top, < 0.8 mm Al equivalent filter (shorter lengths are available)
  • Heavy-duty grid cabinet or hi-speed Bucky with heavy-duty stainless steel tray and 103 LPI 10:1 grid (other grids are available), 55 cm travel
  • Optional {AEC|Automatic Exposure Control: ensures consistent image brightness under a wide range of exposure conditions} detector