Back to top

Perform-X Hi-Lo System

Rad system with elevating table
All the features and advantages of the Perform-X general rad room complemented with a heavy duty 4-way elevating table for easy patient transfer.


Highlights

Perform-X Hi-Lo System

 

Milestone HF LC Series

 

Floor -only or floor-to-ceiling/wall mounted Tube Stand

The TS 99 family of tube stands with its flexible configuration options suits all general rad room reqirements. Choose and combine any of the options like rotational column (R), transverse arm movement (T), extended rails and digital SID display. Ideal for studies from lower extremities to chest/skull expossures due to its wide vertical motion range. 

Wall Bucky Stand

The WS 99 wall Bucky stand can accept a variety of different cassette size film/CR/DR or fixed full size flat panel DR receptors. Usually floor-to-wall, whith the free standing kit, the stand can be installed anywhere in the room. Choose the manual or motorized tilting option for exposures with oblique receptor positions. The WS 99 is equipped with dual-rope counterbalance system and an electromagnetic lock. 

4-way Float Top Elevating Patient Table 

When transferring patients onto the table, the 30 cm (or 50 cm depending on configuration) vertical travel and the 250 kg weight rating are invaluable features. Dedicated pedals drive the table top up and down and release the brakes of the floating table top. A comprehensive set of interlocks ensure safe operation.

Specifications

1. System Features

Perform-X Hi-Lo System
  • High frequency microprocessor controlled generator
  • APEX (PC controlled, TS Monitor) and AEC electronics optional
  • Heavy duty 4-way elevating table for easy patient transfer
  • 360° tube rotation
  • Floor mounted stands stand with variable combination of movements
  • High quality X-ray tube, manual collimator and HV cables

2. Generator

Milestone HF LC Series
  • Milestone HF LC: 32 kW – 50 kW, 100 kHz, 10-up to 630 mA range, 125/150 kV. (depending on x-ray tube selected. please inquire for x-ray tube upgrades)
  • Power Requirements: 208-400VAC single or three-phase (Please specify input power when ordering). Line matching transformers are available at additional cost)
  • Single-phase stored energy version up to 50 kW; 6.5/ 10/ 20 kWs stored energy (Approx 65/100/200 mAs exposures @ 100 kV) available
  • Microprocessor control delivers reliable and accurate exposure parameter management
  • Console Type: Membrane switch with 100 anatomical programming (APR) settings
  • Can operate as a three-point technique selection generator (kV, mA and time), or in 2-point technique (kV, mAs)
  • Wide range of selectable exposure times for easy parameter selection and flexibility
  • Rapid automatic calibration mode reduces onsite procedure time
  • Automatic tube protection and interlocks are standard features
  • Compact Size: Width: 60 cm, Depth: 40 cm, Height: 50 cm

3. Tube Stand

TS 99 Tube Stand
  • Electrical locks for vertical and longitudinal positioning
  • 360° tube rotation with electric locks
  • Very quiet, “Easy-glide” effortless operation with special bearing systems
  • Fully counter-balanced, double rope system for safety
  • Extremely low focus-floor distance (approx. 25 cm)
  • TubePort Mount or Trunnion ring for x-ray tube
  • Floor-to ceiling, floor to wall or floor only mounting options
  • Certified manual collimator
  • Degree of freedom options: column rotation (“R” version) and cross-table travel (“T” version) or combination of both (“RT” version)
  • Optional digital SID and X-ray tube inclination display

4. X-ray Tube

Rad-14 X-ray Tube
  • 0.6 / 1.2 mm focus, 18/50 kW, 300 kHU, 12° target angle
  • 10 m standard (longer cable pairs available)
  • High/Standard Speed. 

Other types are available.

5. Wall Stand

WS 99 Wall Stand
  • 149 cm vertical travel area allows for the lowest and highest exposure positioning centered with tube stand
  • Fully counter-balanced, double rope system for safety
  • Electrical lock for easy positioning and permanent placement
  • Includes accessory rails that support a variety of accessories
  • Panel cover has permanent cross-lines and AEC field’s marks for easy patient and tube positioning
  • Wall box with terminal strips and cable covering hosing for a professional look
  • Heavy-duty grid cabinet or hi-speed Bucky with heavy-duty stainless steel tray and 103 LPI 10:1 grid (other grids available).
  • Optional AEC detector

6. Patient Table

Phoenix Elevating Radiographic Table
  • Heavy duty structure, rated at 225 kg patient load
  • Vertical travel 55 cm – 85 cm (table top heights)
  • Electric locks for longitudinal and transverse travel
  • 110 cm longitudinal, 24 cm transverse table top travel
  • 220 cm x 81 cm table top, < 0.8 mm Al equivalent filter (shorter lengths are available for small rooms)
  • Heavy-duty hi-speed Bucky with heavy-duty ss. tray and 103 LPI 10:1 grid (other grids are available), 55 cm travel
  • AEC optional